Fisher & Paykel

Fisher & Paykel OB60SC7CEX4

Answers and step-by-step fixes from the official Fisher & Paykel manual.

Which light on the control panel is lit or flashing?

• Temperature indicator lit: Oven is heating up to temperature. This light glows while the oven preheats and goes out once the oven reaches the set temperature.
• Timer indicator lit (steady): The kitchen timer is counting down. This light stays on while the timer runs. The timer does not turn the oven on or off.
• Cooking time indicator lit: An automatic cooking time is set. This shows a cooking time has been set for automatic cooking.
• Automatic cooking stop indicator (A) lit: A stop time is set for automatic cooking. The oven will turn off on its own when this stop time is reached.
• Timer indicator flashing with beeping every 7 seconds: The timer countdown has finished. The oven beeps and the timer indicator flashes to tell you the set time is up.
• Cooking time and stop time (A) indicators flashing with beeping every 7 seconds: Automatic cooking has finished and the oven turned off. The oven turns off on its own once the stop time is reached, then beeps until you cancel it.

Common problems

The oven does not work at all

1. Is there power to the oven? Check the wall switch is turned on, the fuse has not tripped, and there is no power outage in your area.
2. Has the clock been set? The oven will not work until the clock is set, including after a power cut.
3. Is the display lit but the oven still not heating? The oven may be set for automatic cooking and will turn on later at the set time.

The oven light does not come on

1. Has the clock been set? The oven will not work, and the light will not come on, until the clock is set.
2. Has the light bulb blown? Replace the bulb or bulbs following the steps for your model.
3. Does the light stay off just when you open the door? This is normal. The light only comes on once you have selected a cooking function.

The oven is not heating

1. Are you opening the door too often during cooking? Make sure the door is properly closed and avoid opening it frequently while cooking.
2. Has the clock been set? The oven will not heat up until the clock has been set.

The fan keeps running after I turn the oven off

1. Is the oven still hot? If the oven is over a certain temperature, the cooling fan turns on by itself to cool it down. This is normal.
2. Have you set a delayed start with automatic cooking? The fan may run while the oven waits, but it will not heat up until the start time arrives. This is normal.

Step-by-step guides

Set the clock

1. Wait for the display to flash when the power is turned on or restored after a cut.
2. Touch the - or + controls to set the time.
3. Touch the cooking time and stop time controls together for 2 seconds to accept the time.
4. To change the time later, touch the cooking time and stop time controls together for 2 seconds.
5. Touch the - and + controls to set the new time.
6. Touch the cooking time and stop time controls together again for 2 seconds to accept the new time.

Replace the oven light bulb

1. Let the oven cavity and grill element cool down.
2. Turn the oven off at the wall before continuing.
3. Unscrew the glass cover by turning it anti-clockwise.
4. Carefully pull out the faulty halogen bulb.
5. Fit the new bulb, holding it in a soft cloth.
6. Replace the glass cover.
7. Turn the oven back on and set the clock.

Condition the oven before first use

1. Remove all packaging, including the yellow packing retainers.
2. Make sure the side racks and catalytic panels are fitted.
3. Make sure you have set the clock.
4. Make sure all the shelves are fitted.
5. Select the Bake function.
6. Set the temperature to 200 degrees C and heat for 30 minutes.
7. Select the Fan Grill function and heat for 20 minutes.
8. Select the Fan Forced function, heat for 20 minutes, then switch the oven off.